3M Peltor MT7N and Gentex Microphone + NATO-Adapter
For 3M Peltor headsets, most microphones are also available separately. More about: the normal dynamic microphone MT7N, the extra moisture-resistant Gentex mic MT31 and the NATO cable adapter we will cover here. #Ad
3M Peltor Gentex Microphone MT31
General:
The Gentex MT31microphone by 3M Peltor is a waterproof microphone with a gooseneck microphone arm. It is very flexible and comes with wind protection.
It was specially developed for shooters (shooting sports) and the military, especially the navy.
Details:
- waterproof (deep 2 ft (60 cm) for 30 Minuten)
- flexible gooseneck microphone arm
- wind protection
SKU / EAN / MPN / ASIN / Amazon-Link
SKU: 4010-15 | EAN: 7318640064102 | MPN: MT31 | ASIN: B004VIKZV6 | MT31 on Amazon
3M Peltor Dynamic Microphone MT7N
General:
The dynamic microphone MT7N from 3M Peltor is a replacement microphone for various Peltor XP / XPI headsets. It was specially developed for shooters (shooting sports) and the military. The microphone boom can be positioned at different angles.
Details:
- dynamic microphone
- MT7N
- positioning at different angles
SKU / EAN / MPN / ASIN / Amazon-Link
SKU: 4010-17 | EAN: 7318640061491 | MPN: MT7N900 | ASIN: B00PCMRTG4 | MT7N on Amazon
Note: Can only be mounted on Peltor headsets where dynamic microphone connection is possible. If necessary, a cable connection kit must be used.
Headsets that had previously been plugged into an electret microphone will not work with this microphone.
3M Peltor NATO Adapter TP120 zu J11
General:
The 3M Peltor NATO adapter is needed if you need to purchase headsets from non-European countries such as the USA or Canada and then connect them to an EU-PTT adapter. The adapter allows the connection of NATO-populated Peltor headsets to standard Peltor PTT adapters.
Details:
- Plug: J11 (Nexus TP-120)
- Socket: J11 (Nexus TP-120)
- length: 9.84 inch (25 cm)