Warrior Assault Systems RAPTOR Releasable Plate Carrier Bundle AK47 Olive M
The RAPTOR plate carrier Bundle M from WARRIOR was developed with the input of Special Forces units and is based on the US-SPEAR cut.
RAPTOR Plate Carrier, M Bundle WARRIOR Elite Ops
Pictures may vary from the original.
GeneralThe RAPTOR plate carrier Bundle M from WARRIOR Assault System was developed with the input of Special Forces units and is based on the US-SPEAR cut. The plate carrier has an excellent armor coverage while allowing all important movement and mobility.
Details:- for ballistic inserts
- Front and back pockets for hard ballistic plates (dimensions 30 x 25cm)
- great freedom of movement
- Front and back quick release system
- simple and flexible size adjustment
- double-sided quick release system in the shoulder area
- Modular loops for pouches in the Nato standard 25 mm
- Velcro surface in the chest area
- split velcro front opening
- Rescue handle
- 2 pockets (17x22 cm) for SK4 protection plates can be attached to the side with hook-and-loop (not included)
- only the versions explicitly referred to as G36 bundle are suitable for G36,
- 5.56mm bundle (M4 and open-M4) are not suitable for G36 magazines
- Material: 100% 500D Cordura, all straps after US Mil Spec
- materials used have the lowest infrared values (99.8%) and are produced according to military specification
- 1 x Plate Carrier (Size M)
- 1 x Large Admin Pouch
- 2 x Utility Pouch Small
- Appearance of the pouches may vary depending on the magazine type
- Magazine pouches for a total of 5 magazines can be put together from single, double and triple magazine pouches
Note: Magazine types vary
|Height||40 - 50 cm
16 - 20 Inches
|Girth||86 - 107 cm
34 - 42 Inches
|Chest||97 - 109 cm
38 - 43 Inches
Protection:The plate carrier itself does not provide ballistic protection. It can accommodate the original WARRIOR NIJIIIA softballistics for the RAPTOR plate carrier from NEXUS. For protection class NIJIV / SK4 additional protection plates are required, these are not included.
All SK4 / NIJIV (standalone) plates with the dimensions 25 cm x 30 cm (10 x 12 inches) fit
The original WARRIOR soft ballistics for the RAPTOR plate carrier from NEXUS are also available at our shop.
Matching inserts:Size M:
- DCS inserts (manufacturer: GARED / NEXUS) Yes: front / back No: sides
- RAPTOR M Inserts manufacturer: GARED / NEXUS
- Plate carrier Softballistics SK1 Manufacturer: BATEX Yes: in the plate pocket
- SK1 Insert Manufacturer: BATEX
- SK4 10 x 12 inch protection plates