Warrior Assault Systems DCS Releasable Plate Carrier Multicam | L

Warrior Assault Systems DCS Releasable Plate Carrier Multicam | L

Art no.: 1003-15-multi-l

The DCS Releasable (Dynamic Combat System) Plate Carrier from WARRIOR Assault Systems is a light and modular plate carrier equipped with an emergency release system and can hold hard and softballistic inserts on the front, back and sides.

In the moment out of stock, but maybe on Amazon!

DCS Releasable Plate Carrier WARRIOR Elite Ops


Pictures may vary from the original.

General

The DCS Releasable (Dynamic Combat System) Plate Carrier from WARRIOR Assault Systems is a light and modular plate carrier equipped with an emergency release system and can hold hard and softballistic inserts on the front, back and sides. The carrier is fully releasable, should the user need to rapidly remove the carrier in an emergency situation, for example if he falls into water, or if a medic needs to treat a serious trauma injury.

Details:

- for ballistic insertss
- Size easily and individually adjustable
- internal cable system, featuring an ambidextrous release pull located in the shoulder
- smooth, rapid separation of the front, back and sides into individual components
- Modular loops for attaching pouches in the Nato standard 25 mm
- front with hook-and-loop for sides
- Padded and removable shoulder pads
- Fastex closure on the left shoulder strap to quick take on and off
- removable side pouches to accommodate SK4 protection plates
- Rescue handle
- Inside with 3D mesh fabric for high wearing comfort and ventilation
- Material: 100% 500D Cordura, all straps after US Mil Spec
- materials used have the lowest infrared values (99.8%) and are produced according to military specification

Note: No ballistics included!

Size:
L: circumference 102 cm to 120 cm
M: circumference 86 cm to 107 cm

Protection:

The plate carrier itself does not provide ballistic protection.
However, it can take the original WARRIOR soft ballistics for the DCS plate carrier of NEXUS.
The soft ballistics have the protection class NIJ IIIA and a splinter protection level of 630m/s. This protection class stops e.g. 9mm pistol bullet.

For protection class NIJIV / SK4 additional protective plates are needed, they are not included. It fits all SK4 / NIJIV plates with the dimensions 25 cm x 30 cm (10 x 12 inches).

When using standalone plates, soft ballistics is not necessary.

The original WARRIOR soft ballistics for the DCS plate carrier from NEXUS is also available from us.

Matching inserts:

- DCS inserts (manufacturer: GARED / NEXUS)
- Plate carrier Softballistics SK1 manufacturer: BATEX
- SK4 10 x 12 inch protection plates

Color-Google
camouflage
Color
Multicam
Typ
without
Size
L
No review available for this item.
* incl. tax, plus shipping