Warrior Assault Systems RAPTOR Releasable Plate Carrier Black | L

Warrior Assault Systems RAPTOR Releasable Plate Carrier Black | L

Art no.: 1003-04-schw-L

The RAPTOR plate carrier from WARRIOR Assault System was developed with the input of Special Forces units and is based on the US-SPEAR cut.

In the moment out of stock, but maybe on Amazon!

RAPTOR Plate Carrier WARRIOR Elite Ops


Pictures may vary from the original.

General

The RAPTOR plate carrier from WARRIOR Assault System was developed with the input of Special Forces units and is based on the US-SPEAR cut. The plate carrier has an excellent armor coverage while allowing all important movement and mobility.

Details:

- for ballistic inserts
- Front and back pockets for hard ballistic plates (dimensions 30 x 25cm)
- great freedom of movement
- Front and back quick release system
- simple and flexible size adjustment
- double-sided quick release system in the shoulder area
- Modular loops for pouches in the Nato standard 25 mm
- Velcro surface in the chest area
- split velcro front opening
- Rescue handle
- 2 pockets (17x22 cm) for SK4 protection plates can be attached to the side with hook-and-loop (not included)
- Material: 100% 500D Cordura, all straps after US Mil Spec
- materials used have the lowest infrared values (99.8%) and are produced according to military specification

Size M:
Height:
40 - 50 cm
16 - 20 Inches

Girth:
86 - 107 cm
34 - 42 Inches

Chest
97 - 109 cm
38 - 43 Inches

Size L:
Height:
43 - 53 cm
17 - 21 Inches

Girth:
102 - 127 cm
40 - 48 Inches

Chest
107 - 122 cm
42 - 48 Inch


Protection:

The plate carrier itself does not provide ballistic protection. It can accommodate the original WARRIOR NIJIIIA softballistics for the RAPTOR plate carrier from NEXUS. For protection class NIJIV / SK4 additional protection plates are required, these are not included.
All SK4 / NIJIV (standalone) plates with the dimensions 25 cm x 30 cm (10 x 12 inches) fit
The original WARRIOR soft ballistics for the RAPTOR plate carrier from NEXUS are also available at our shop.

Matching inserts:

Size M:
- DCS inserts (manufacturer: GARED / NEXUS) Yes: front / back No: sides
- RAPTOR M Inserts manufacturer: GARED / NEXUS
- Plate carrier Softballistics SK1 Manufacturer: BATEX Yes: in the plate pocket
- SK1 Insert Manufacturer: BATEX
- SK4 10 x 12 inch protection plates

Size L:
- DCS inserts (manufacturer: GARED / NEXUS) Yes: front / back No: sides
- RAPTOR L Inserts manufacturer: NEXUS
- Plate carrier Softballistics SK1 Manufacturer: BATEX Yes: in the plate pocket
- SK4 10 x 12 inch protection plates

Color-Google
Black
Typ
without
Size
L
Color
Black
No review available for this item.

Ballistic-Insert-Guide

Here you get an overview of our plate carrier, Chest rigs and vest covers and the matching ballistic inserts.

Einlagen-Guide

Hinweis: Here is the Link!

https://www.chk-shield.com/en/Insert-Guide/


* incl. tax, plus shipping